ANTIGRAFFITI COATING AG-37


Antigraffiti AG 37 is a clear, ready-to-use polysilazane surface coating to protect and preserve non-absorbent surfaces in industrial environments. AG 37 provides excellent corrosion protection properties on most metal surfaces.

Due to the highly hydrophobic surface dirt and dust can hardly adhere and can easily be removed numerous times without reapplication. The glass-like coating provides scratch resistant properties which sustainably increase the value retention of the product.


ANTIGRAFFITI AG 37 creates a permanent barrier by chemically binding to the substrate. The solvent-based systems can be applied to the carrier material via spray or dip coating, roll-to-roll application or spin coating as well as wipe-on for smaller areas.ANTIGRAFFITI AG-37 is dry-to-touch after 30 minutes. Full performance is achieved after 7 days cure at room temperature. Alternately, faster curing for full performance can be achieved in 1-2 hours at 130°C.


Advantage of ANTIGRAFFITI AG 37:

Excellent corrosion resistance
Strong easy-to-clean properties
Exceptionally adhesion on substrate (chemical bound)
Clear / transparent
Chemical resistance/UV resistance
Outstanding durability
Ambient temperature curing
Simple application methods

Antigraffiti AG 37 is a clear, ready-to-use polysilazane surface coating which provides easy removal of graffiti including permanent marker, inks, and paints. Road tar, tree sap, dirt, grease, and other stains are also easily removed.
AG 37 is applied as is. No mixing with another component is required! Additionally, only a thin film of AG 37 is needed to provide superior protection and curing can be accomplished at room temperature. Curing at high temperatures (>130°C) gives additionally a very good corrosion resistance.
Graffiti and other contaminates can be easily removed using standard commercially available cleaners and/or pressure washing.
AG 37 creates a permanent barrier by chemically binding to the substrate. The protected material can be cleaned numerous times without reapplication.

PRODUCT APPLICATIONS

AG 37 provides excellent protection from soiling on ferrous, non-ferrous and galvanized metals, painted and powder coated surfaces and synthetic materials.
AG 37 will not alter the normal appearance of the substrate.

All surfaces must be cleaned prior to the application of AG 37. All traces of existing dirt, dust and other loose material should be removed. 
Apply AG 37 using spraying for large surfaces or wipe-on for smaller surfaces. For best results, use only a thin application. Dilution of the product and re-coating are not necessary.
AG 37 is dry-to-touch after 30 minutes. Full performance is achieved after 7 days cure at room temperature.
Alternately, faster curing for full performance can be achieved in 1-2 hours at 130°C.
Proper clean-up is essential. Clean tools immediately after use with acetone or mineral spirits followed by soapy water. Cured material cannot be removed with solvent.







Follow us on:

Facebook
Twitter
Google Plus
Name:
Email:
Message:

Enter the correct result.

0 plus 2 is equal to:
Vse pravice pridržane © 2013 Samson Kamnik d.o.o. | Izdelava spletnih strani in programiranje: Ms3 d.o.o.